Model NO.: XK-160
Power Source: Electric
Gear: Hardened Gear
Blender: Automatic Mode
Nip Adjustment: Automatic
Safety Device: Best
HS Code: 84778000
Warranty: 1 Year
Automatic Grade: Automatic
Type: Open Mixing Mill
Bearing: Double-Row Self-Aligning
Guiding Plate: Automatic
Cutting Blade: Equipped
Lubrication: Auto Mode
Transport Package: plywood case
Origin: Qingdao, China
I. Machine Name:
Laboratory Two Roll Rubber Mixing Mill Machine, Rubber Mixing Mill, Two Roll Mill, Two Roll Mixing Mill, Rubber Mixing Machine.
Model No.: XK-160, XK-400, XK-450, XK-550, XK-560, XK-610...
This machine is mainly used in Rubber & Plastic Product factory for Natural Rubber Mixing (Plasticizing), Raw Rubber and Compound mixing, Rubber warm-up mixing and pressing sheet.
1. The roll adopts chilled alloy cast iron and its surface is hard and wear-resistance with HS72-75. The internal cavity is processed for circulated water cooling and heating to make temperature well proportioned on the roll surface.
2. The machine is equipped with an overload protection device to prevent the main components from being damaged.
3. The machine is also equipped with an emergency brake device. When an emergency arises, just draw the safety pull rod or press safety button, and the machine will stop immediately. It is safe and reliable.
4. The transmission system adopts hardened tooth surface gear motor reducer and self-aligning roll bearing, which has a compact structure with higher transmission efficiency, lower noise and longer service life.
5. Automatic nip adjusting equipment.
6. The base frame is a whole framework, which is convenient for installation.
7. Stock pan for direct rubber sheet and knife to cut as your need to assemble.
8. Auto-lubrication system for grease or oil and match bearing bush.
9. Tailored structure, easy to operate and looking nice.
10.After-sale service is supported including online training, technical assistance, installation, commissioning, annual maintenance and so on.
IV. Technical Parameter:
|Parameter \ Model||XK-160x320mm|
|Roll diameter (mm)||160|
|Roll length (mm)||320|
|Gap range (mm)||0.3-5|
|Front roll linear speed (m/min)||9|
|Feeding capacity per batch (kg)||1-2|
|Motor power (KW)||5.5|
|Supply power||380V, 50HZ|
|Parameter \ Model||XK-550|
|Roll Diameter (MM)||550|
|Roll Length (MM)||1530|
|Front roll Speed (M/min.)||28.5|
|Nip Adjustment (MM)||0.1-15|
|Motor Power (KW)||110|
|Parameter \ Model||XK-450||XK-400|
|Roll Diameter (MM)||450||400|
|Roll Length (MM)||1200||1000|
|Front roll Speed (M/min.)||21.8||18.65|
|Motor Power (KW)||55||37|