Model NO.: XK-450
Power Source: Electric
Type of Tire Machinery: Rubber Regeneration Machinery
Control Mode: PLC
Front Roll Surface Speed (M/Min): 24.26
Warranty: 1 Year
Automatic Grade: Automatic
Type: General Rubber Machinery
Type of General Rubber Machinery: Material Processing Machine
Certification: ISO, CE
Working Diametetr of Rolls (mm): 450
Rfiction Ratio: 1: 1.2
Specification: ISO9001: 2008, SGS
HS Code: 8477800000
18" Inch Rubber Mixing Mill, Open Mixing Mill, Two Roll Mixing Mill, Mixing Mill, Bull Gear Drive Mixing Mill XK-450
This machine consists of Base, Rack, Gland, Rollers, Bearing, Transmission device, Lubrication device, Decelerator, Adjustment device of the roller temperature, Emergency shutdown device and brake rigging and etc.
It is mainly used for plasticating and mixing of rubber or plasticiser, warming and sheeting rubber compound, cracking and refining of reclaimed rubber.
1' Two rollers are made from Chilled Cast Iron, smooth surface is highly polished and scratch proof by cutting knife: High hardness(68-75HSD) and wear-resistant.
2' The roller is hollow structure, which is for adjusting the temperature of the rollers by steam or cooling water in term of different request, Circulation of steam and cooling water is provided through the rolls to control the temperature.
3' There are two kinds of Nip adjustment mode for option: Manual or electric.
4' There are three kinds of Main bearings for option: Bearing or Copper bush or Nylon bush.
5' Machine will be tripped off if overloaded to protect valuable electrical circuit.
6' All electrical connections are well, short circuits is impossible by any means.
7' It can be with Stock Blender, or can provide provision to fit stock blender in future.
8' Provision for opening of Nip Guard is provided for the purpose of cleaning of rollers and nip.
|Working Diameter of rolls (mm)||160||230||250||300||360||400||450||560/510||550||660|
|Working Length of Rolls (mm)||320||600||620||750||900||1000||1200||1530||1500||2130|
|Front Roll Surface Speed (m/min)||8.95||10.21||14.1||15.1||16.25||18.65||24.26||27.72||27.94||28.6|
|Max. nip (mm)||4.5||7||8||10||10||10||15||15||15||15|
|Capacity per Batch(kg)||1-2||6-10||8~15||15~20||20~25||18-35||25-50||35~50||50~60||165|
|Motor Power (kw)||5.5||15||18.5||22||30||37||55||90||110||245|